To Next PageTo Next Page
Need help?Do you have a question about the FMS Fox and is the answer not in the manual?
Provides essential background information and contact details for technical support.
Details the meaning of specific symbols used throughout the operating instructions.
Specifies the proper application and limitations of the model airplane.
Details the features and components of the pre-fabricated ARF model airplane.
Lists all components included in the package and required additional items for operation.
Provides crucial warnings and guidelines for safe handling, operation, and potential risks.
Outlines essential checks and procedures to perform before operating the model for the first time.
Details safety precautions and best practices to follow while operating the model airplane.
Covers essential safety guidelines for handling, charging, and storing batteries to prevent hazards.
Provides visual guidance for safely removing the model airplane's cabin hood.
Step-by-step instructions and diagrams for attaching rudder horns to control surfaces.
Guide on connecting and positioning the elevator linkage rods and tail unit.
Details how to set up and adjust control linkage rods for proper rudder and aileron movement.
Instructions for connecting the radio receiver and its cables to the flight controller and servos.
Explains how to connect wing servo cables to the fuselage connection points.
Guides on positioning the flight battery, connecting it to electronics, and initial system checks.
Explains how to properly measure and adjust the center of gravity for optimal flight stability.
Details recommended control surface deflections and tests for proper model response.
Describes how to perform a range test to ensure reliable remote control signal before flight.
Provides guidance on the correct method for launching the model airplane, including using a helper.
Explains how to initiate and maintain curves, and the importance of flight speed and height.
Details how to adjust trim settings for elevator, rudder, and ailerons for straight and level flight.
Guidance on approaching for landing, maintaining speed, and executing the touchdown.
Explains how to set mechanical linkages to match transmitter trims after landing.
Steps to calibrate the transmitter's throttle lever for correct motor control.
Guide on how to enter and navigate the flight controller's programming menus.
Details the available functions, their assignments, and sound sequence/melody indicators.
Provides detailed explanations for specific programmable functions like Brake, Battery Type, and Motor Timing.
Step-by-step guide on how to safely remove and install the folding propeller assembly.
Covers regular checks for functional safety and smooth operation of the model and transmitter.
Information on environmentally responsible disposal of the product and its batteries.
Details key physical dimensions and weight of the flight model.
Provides information on the motor type, suitability, and propeller dimensions.
Lists voltage range, current capacity, BEC, and plug system for the flight controller.
Specifies the recommended transmission frequency and minimum number of channels for the remote control.
Details the recommended battery type, voltage, capacity, and discharge rate.
General
