EasyManua.ls Logo

FMS Fox - Intended Use; Product Description; Scope of Delivery

FMS Fox
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
3. Intended Use
This product is an electrically powered model plane with radio remote control through a remote control system. The
model is intended for outdoor use and must only be own on days with little wind. The model airplane is pre-assem-
bled and is delivered with built-in remote control and drive components.
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.
Observe all safety information in these operating instructions. They contain important information on
handling of the product.
You are solely responsible for safe operation of the model!
4. Product Description
The electrical ight model „Fox“ is a pre-fabricated ARF model (ARF = „Almost Ready to Fly“), that is made ready for
use in just a few steps. All drive and control components are built-in and ready for use.
The ight model is controlled (motor speed, ight direction, ight height) via a radio remote control that must be
purchased separately. The ight modes is suitable for model plane beginners who have collected some initial
experience with similar models.
5. Scope of Delivery
Fuselage
Elevator rudder
Left and right wings
Wing rod
Small parts (e.g. screws)
Operating Instructions
Operation also requires a radio remote control with at least 5 channels (we recommend a computer remo-
te control system with 6 or more channels), a ight battery (3 cells LiPo, 11.1 V, 1200 mAh and up, 25C), a
suitable high-voltage plug system and a charger with charging cable.

Table of Contents

Related product manuals