FMUser cze-01a - Sound Quality Factors; Interference Causes and Solutions

meters, under the premise of
receiving
about 100 meters distance. Please contact us for more and better transmission proposals.

About sound
quality
1. Please keep line-
in volume under 50% and adjusted to a proper level when
machine.
2. If the input audio
sources (such as audio
mode or treble enhancement
mode,
because there is an audio amplifier built
high quality without
distortions
3. To ensure better
listening experience, please adjust the output volume
transmitter
to a matching grade with that of other local radio stations.

Interference
If you hear buzz
es from the transmitter,
cable or microphone, or it could be the power source,
last and least possible reason
aspects to solve this problem:
1)
Sort out all the cables on the t
other. The antenna should
not be blocked by any object.
2) If the buzzes still exists
, please pull out the line
the antenna and power
to be connected with the transmitter, then
exists.
3) If the buzzes stop
after step 2
cable, or the line-
in cable was intertwined with the power cord, or the audio input equi
caused the buzz. In this case, keep
problem.
We have met similar circumstances
FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物技术开发有限公司
receiving
by car fm radio. Using a normal FM radio might get
about 100 meters distance. Please contact us for more and better transmission proposals.
quality
in volume under 50% and adjusted to a proper level when
sources (such as audio
from computer) include
bass
mode,
please adjust the volume of transmitter to lower level,
because there is an audio amplifier built
-in inside the transmitter, thus
the audio output is of
distortions
.
listening experience, please adjust the output volume
to a matching grade with that of other local radio stations.
es from the transmitter,
possible reason
s could be fro
cable or microphone, or it could be the power source,
audio input device, or
last and least possible reason
is on the transmitter. Please check from
Sort out all the cables on the t
ransmitter to make sure they are not inter
not be blocked by any object.
, please pull out the line
-
in cable and Microphone wire, leave only
to be connected with the transmitter, then
check if
after step 2
, the possible reason
could be the quality of the line
in cable was intertwined with the power cord, or the audio input equi
caused the buzz. In this case, keep
the wires apart from each other
should
We have met similar circumstances
from our customers and we suggested the
广州市汉婷生物技术开发有限公司
14 / 16
by car fm radio. Using a normal FM radio might get
about 100 meters distance. Please contact us for more and better transmission proposals.
in volume under 50% and adjusted to a proper level when
inputting into
bass
enhancement
please adjust the volume of transmitter to lower level,
the audio output is of
listening experience, please adjust the output volume
level of
s could be fro
m the line-in
audio input device, or
antenna. The
is on the transmitter. Please check from
the following
ransmitter to make sure they are not inter
twined with each
in cable and Microphone wire, leave only
check if
the buzz still
could be the quality of the line
-in
in cable was intertwined with the power cord, or the audio input equi
pment
should
solve the
from our customers and we suggested the