Do you have a question about the FMUser SDA-15B and is the answer not in the manual?
Frequency Range | 87.5-108MHz |
---|---|
Audio Input Connector | RCA |
Modulation Frequency Deviation | ±75KHz |
SNR | ≥70dB |
Antenna Connector | BNC |
Modulation | FM |
Stereo Separation | 40dB |
Audio Frequency Response | 15KHz |
Antenna Impedance | 50 ohm |
Operating Temperature | -10°C |
Essential safety instructions for operating and maintaining the transmitter, including professional repair requirements and environmental considerations.
Details the continuously adjustable output power range from 0 to 15 watts.
Explains the automatic protection activated by incorrect antenna connection.
Details the automatic protection that activates at very high operating temperatures.
Specifies the main SDA-15B transmitter unit.
Details the included 100% AL antenna type (1/4 or 1/2 wave) with TNC connector.
Provides specifications for the DC15V/4A power adapter.
Instructions on how to adjust the broadcasting frequency using the device.
Guide on how to adjust the transmitter's output power.
Instructions for adjusting the audio input volume level.
Instructions for adjusting the microphone input volume level.
Guidance on responding to SWR warnings and resolving antenna issues.
Instructions for dealing with over-heat warnings and ensuring proper ventilation.
Procedure for setting the SWR protection threshold.
Procedure for adjusting the temperature protection threshold.
Steps to reset the transmitter to its original factory settings.
Specifies the working voltage and current consumption of the transmitter.
Details the frequency range, stability, and stepping.
Covers operating environment, output resistance, and power range.
Troubleshooting steps for when the transmitter fails to power on.