EasyManuals Logo

FNM HPE Series User Manual

FNM HPE Series
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
FNM
®
HPE Series 71
3.3.1.2 Transmission oil level check
To check the transmission oil level refer to the user manual provided by the manufacturer of your
transmission.
3.3.2 Coolant level check
Ordinary maintenance: made by the boat user and the workshop staff.
To verify the coolant liquid level, take care to the boat and/or engine inclination.
1. Unscrew the coolant fill cap, then check that the fluid level is between minimum and maximum
limits (if present), or not excessively low.
2. If necessary top up to a maximum level.
In any case the coolant liquid level must be over the engine head to ensure a correct operation.
Always verify the good seal of the filter cap to avoid leakage after reassembly.
Never refill the coolant circuit with sea water!
Be careful when opening the cap of the expansion tank: pressurized liquid may splash
out and cause damage to property or persons.

Other manuals for FNM HPE Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FNM HPE Series and is the answer not in the manual?

FNM HPE Series Specifications

General IconGeneral
BrandFNM
ModelHPE Series
CategoryEngine
LanguageEnglish

Related product manuals