To Next PageTo Next Page
Need help?Do you have a question about the Focus JAM2SL and is the answer not in the manual?
Explains 7mm adjustment range for optimal balance based on frame size, terrain, and riding style.
Increases front wheel pressure for cornering and improves high-speed stability.
Facilitates lifting the front wheel and improves agility in corners.
Loosen bolts 1 and 2 to enable chainstay length adjustment.
Rotate FlipChips (A-D) by 180° and re-tighten bolts to 8 NM using a 4mm Allen key.
In the second step, loosen bolts 3 and 4.
Rotate chainstay flip-chips by 180° and tighten bolts to 8 NM.
Specifies short position chainstay length as 440 MM for frame sizes S + M.
Specifies long position chainstay length as 447 MM for frame sizes L + XL.
FlipChips must always point in opposite directions for correct installation.
Explains 7mm adjustment range for optimal balance based on frame size, terrain, and riding style.
Increases front wheel pressure for cornering and improves high-speed stability.
Facilitates lifting the front wheel and improves agility in corners.
Loosen bolts 1 and 2 to enable chainstay length adjustment.
Rotate FlipChips (A-D) by 180° and re-tighten bolts to 8 NM using a 4mm Allen key.
In the second step, loosen bolts 3 and 4.
Rotate chainstay flip-chips by 180° and tighten bolts to 8 NM.
Specifies short position chainstay length as 440 MM for frame sizes S + M.
Specifies long position chainstay length as 447 MM for frame sizes L + XL.
FlipChips must always point in opposite directions for correct installation.
General| Brand | Focus |
|---|---|
| Model | JAM2SL |
| Category | Bicycle Accessories |
| Language | English |
