To Next PageTo Next Page
Need help?Do you have a question about the Follett Horizon Elite series and is the answer not in the manual?
General| Model | Horizon Elite series |
|---|---|
| Dimensions (W x D x H) | Varies by model |
| Power Supply | Varies by model; typically 115V or 208-230V. Consult specific model specifications. |
| Weight | Varies by model |
| Condenser Type | Air-cooled or water-cooled |
| Refrigerant | R-404A |
| Amperage | Varies by model |
Carefully unpack and inspect the contents of your Follett ice machine.
Ensure proper drainage, water supply, and electrical power are available within 6 feet.
Locate and cut the shuttle actuator hole on the dispenser top.
Install shuttle actuator through dispenser top and secure with locking nut.
Mount ice machine in cabinet, ensuring proper venting to avoid hot air recirculation.
Install ice transport tube, ensuring correct pitch, insulation, and connections.
Connect external plumbing, water supply, and drain for air-cooled models.
Connect external plumbing, water supply, return, and drain for water-cooled models.
Connect the ice transport tube for air-cooled ice machines.
Connect potable water lines for air-cooled ice machines.
Connect the power cord to the ice machine and wall outlet for air-cooled units.
Set the TDS switch for optimal water scale control.
Connect cooling water lines for water-cooled ice machines.
Connect ice transport tube for water-cooled ice machines.
Connect potable water line for water-cooled ice machines.
Connect cooling lines and note water valve settings for water-cooled units.
Connect power cord and install grounding plate for water-cooled units.
Install front cover and plastic grille for undercounter air-cooled units.
Attach the louvered front cover onto the ice machine.
Adjust agitation timer for Cornelius models ED, DB, DF, IDC and Flavor Fusion.
Adjust agitation time and frequency for Lancer 4500 series.
Configure agitation settings for Lancer FS series via hidden menu.
No agitation adjustment is required for Servend models.
Overview of diverter plates for Cornelius ED, DF, and DB series.
Install the ice diverter plate for Cornelius ED, DF, and DB series dispensers.
Sanitize ice bin and turn on water, checking for leaks.
Sanitize machine, verify component operation, and check ice production.
