34
GB
SIKA PLUS
03-01
03-02
1
3
2
3 IDENTIFICATION PLATE AND CERTIFICATION (Fig. 03-01)
Figure shows plate in detail and its location on the machine.
NOTE:
Type, code and production number marked on the plate, must be referred to anytime you contact the
manufacturer either for information or for ordering spares.
3.1 OTHER PLATES ON THE MACHINE (Fig. 03-02)
1 - Safety wear on: ear plugs, goggles, gloves
2 - Blade rotation direction
3 - Cutting lubrication flow adjustment
To Next Page
