Need help?Do you have a question about the Fondital Antea 24kW Range and is the answer not in the manual?
Provides a quick guide for turning on and regulating the boiler for immediate use.
Lists LCD display indications for various boiler malfunctions and error codes.
Step-by-step instructions for switching the boiler on after installation and commissioning.
Details on how to set and operate the Central Heating (CH) function of the boiler.
Explains how to set and operate the Domestic Hot Water (DHW) function.
Procedure for burner shutdown due to no flame recognition (fault code E01).
Covers boiler shutdown caused by air intake or flue gas system issues (fault code E03).
Explains shutdowns related to water circulation issues (fault codes E81-E84).
Details boiler shutdown caused by a faulty fan (fault code E40).
Addresses alarms and shutdowns caused by temperature probe failures (fault codes E05, E06, E15).
Schedule for routine boiler maintenance, including inspections, checks, and cleaning procedures.
Outlines the category of the boiler and the compliance required with installation laws and standards.
Lists the UK regulations and British Standards relevant for boiler installation.
Details requirements for connecting the boiler to a sealed central heating system.
Provides the procedure for filling the central heating system, including bleeding and pressure checks.
General requirements for siting balanced flue terminals, including minimum distances.
Step-by-step guide for physically installing the boiler onto the wall and connecting it to systems.
Instructions for connecting the boiler to the gas supply, including compliance with standards and leak testing.
Guidance on connecting the boiler to the central heating and domestic hot water systems.
Instructions for connecting the condensate drain according to applicable laws and standards.
Detailed requirements for installing the condensate discharge pipework to ensure reliable boiler operation.
Details on complying with laws and standards for air intake and flue gas discharge systems.
Details on connecting the boiler to the 230V-50Hz electrical supply, including safety measures.
Procedure for filling the central heating system, including bleeding and pressure checks.
Essential checks to perform before starting the boiler after installation.
Instructions for switching the boiler on and off for daily use.
Procedure for converting the boiler from natural gas to propane fuel.
Procedure for converting the boiler from propane to natural gas fuel.
Steps for adjusting the burner for maximum and minimum heat output and flue gas CO2.
Checks to perform before testing the boiler to ensure correct installation and safety.
Description of the flue cleaning function used for measuring combustion efficiency and setting the burner.
Steps for performing combustion efficiency measurements using the boiler's tower and openings.
Schematic diagram illustrating the electrical connections within the boiler.
General| Type | Combi |
|---|---|
| Mounting | Wall-mounted |
| Max. Heating Output | 24 kW |
| DHW Output | 24 kW |
| Efficiency Class Heating | A |
| Efficiency Class DHW | A |
| NOx Class | 5 |
| Power Output | 24 kW |
| Fuel Type | Gas |
| Weight | 32 kg |
| Heat Exchanger Material | Stainless Steel |
| Warranty | 2 years |
| Gas Type | Natural Gas |
| Dimensions (HxWxD) | 700 x 400 x 250 mm |
To Next Page