22
Review safety before you ride
After completing the procedure, Arthur is ready to ride.
1. Slowly and smoothly open the throttle to accelerate
2. Close throttle to coast; momentum will continue to carry you forward
Braking
1. For slow braking under normal conditions, close throttle and smoothly apply pressure to both front and
rear brake control levers
2. For maximum braking, close throttle and apply firm pressure to both front and rear brake control levers
Ensure that you shift your body weight to a stable position and brace against the force of deceleration to
maintain control of the scooter.
Arthur CBS
Arthur CBS (combined braking system) assists brake control by linking the front and rear hydraulic disc brakes
In this system, the rider's action of depressing one of the brake levers applies both front and rear brakes.
Always brake before entering a turn, as firm application of brakes mid-turn may result in loss of control
When braking in wet conditions or on loose surfaces, braking manoeuvres should be smooth, as sudden
application of brakes may result in loss of control.
Riding
To Next Page
Loading...