Fonzarelli Arthur - Riding Functions; Reverse Mode; Regenerative braking

To Next Page

To Previous Page

Reverse Mode

1. After coming to a complete stop, hold down the BLACK reverse button. Note this button is also ‘Ready’

mode, used to start the vehicle.

2. While holding reverse, slowly open the throttle

3. The scooter will travel in reverse at a slow pace

Engage the brake levers to turn off reverse mode

NOTE: Reverse will only engage after brake has been applied

Regenerative braking

Regenerative braking is engaged automatically when braking applied, improving efficiency by returning

energy to the PowerPack that would otherwise be wasted.

Riding Functions

Ready & Reverse