Why is the vacuum pump running but not evacuating air from the bag in my FoodSaver Kitchen Appliance?
- HhaleypopeAug 15, 2025
If you're making a bag from a roll, ensure one end is sealed. Adjust the bag and try again, making sure the open end is down inside the Drip Tray. Check for wrinkles in the bag along the Sealing Strip; gently stretch the bag flat while inserting it into the Drip Tray to prevent wrinkles. Open the unit and ensure Gaskets are inserted properly, with no foreign objects, dirt, or debris on the Upper or Lower Gasket. If the Latch has been left in the Operate position, the Gaskets may be compressed; turn the Latch to the Open or Store position and allow 10 to 20 minutes for the Gaskets to expand. Make sure the Lid is latched down all the way; if the Latch doesn't catch the Lid and bring it down, there will be a leak between the Gaskets.













