EasyManua.ls Logo

for_q FQ-ARM 4038 BASIC - Care and Maintenance; Routine Cleaning and Checks; Blade Inspection and Replacement; Replacement Parts Information

for_q FQ-ARM 4038 BASIC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
106
Care & Maintenance
- Always keep the appliance clean,
dry and free of oil or grease.
- Wear safety glasses and gloves to
protect your eyes and hands whilst
cleaning.
- For safe and proper working, al-
ways keep the machine and venti-
lation slots clean.
- Regularly check for obvious defects
and/or damaged components.
- Periodically check all fixings. These
could become loose with time due
to vibration.
- Check the collection bag regularly
for signs of wear.
- The most used part is the blade. In-
spect the blades regularly:
- If the blade is worn or blunt, it
must be replaced immediately.
- If the appliance starts to vibrate
excessively, the blades seem to
be unbalanced and must be re-
placed.
- Replace any worn or damaged
parts.
- If the body of the appliance needs
cleaning, wipe it with a brush or a
soft damp cloth. A mild detergent
can be used but nothing like alco-
hol, petrol or other cleaning agent.
- Never use caustic agents to clean
plastic parts.
- Lubricate all moving parts at regu-
lar intervals.
- Store the appliance in a dry place.
Caution! Make sure the appli-
ance is switched o and the
battery is removed.
Replacement Parts
Please quote the following data when
ordering replacement parts:
- Type of machine
- Article number of the machine
- Identification number of the ma-
chine
- Replacement part number of the
part required
Blade
6126175
On request in the market.

Table of Contents