For applications: This allows the user to either manually enter tank tare weights, or to automatically
load full containers of 2,000 lbs.net weight. However, if container is partially empty, or if you are only loading one
tank on a multiple tank scale, you must use "MANUAL" mode.
For applications: You must use "MANUAL" mode.
Will be displayed if AUTO was chosen above.
Use key pad to enter the net contents of containers.
NET WEIGHT EXAMPLES
2000 lb. = Ton Containers (USA)
150 lb. = 150 lb. Cylinders (USA)
907 kg. = Canadian Ton Containers
1000 kg. = Metric Ton Containers
AUTO NET WT / LB (/KG)
WEIGHT = _______
TARE MODE
___AUTO ___MANUAL
Allows you to format your communications baud rate; print format and whether you want to engage the
datalogging (auto print) function.
Do you want the sceen to automatically alternate between diplays?
Choices: "1" = YES "0" = NO
BTM LINE FEEDS
NUMBER = ______
Enter the number of SPACES at the BOTTOM fo your printout.
Choices: 1 to 100.
Allows display to alternate between scale displays automatically or manually as well as displaying 1 or 2 scales at a time.
USE DEL , ENTER
BAUD = ______
Use ARROW KEY to select your BAUD RATE:
Choices: 300, 600, 1200, 2400, 4800, 9600.
TOP LINE FEEDS
NUMBER = ______
Enter the number of SPACES at the TOP of your printout.
Choices: 1 to 100
Use ARROW KEY to select:
Automatically load the net contents of containers
Manually enter the tare weight of your tanks.
NOTE: "AUTO" applies to CL2 & SO2 tanks only
(and on some Drumm-Scale applications)
AUTO =
MANUAL =
9086 FORMAT PRINTER PORT (RS232 / RS485)
9084 SINGLE or DUAL DISPLAY
9085 TANK LOADING MODE
AUTO SCAN ?
1=Y 0=N
Use ARROW KEY to select:
SINGLE = 1 scale displayed
DUAL = 2 scales displayed
NOTE: Single channel scale CANNOT Auto Scan and will only use
single scale display.
100% / AUTO LOAD
SCALE 1 XXX
Enter the value that represents a full tank.
DISPLAY FORMAT
*SINGLE DUAL
Cl2 & SO2
ALL OTHER CHEMICAL FEED, HOPPER & TANK
Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
1150-D Burnett Ave, Concord, CA 94520 USA
1-800-893-6723 US & Canada, Fax: 925-686-6713
www.forceflow.com / info@forceflow.com
File: T4\O&M\AWZMSTR\WZSET3C.tcw 11/99 (B15.pdf)
QUESTIONS ? Help Hotline: 1-800-893-6723
FORCE FLOW
FORCE FLOW
F
F
L
L
O
O
Q
Q
I
I
U
U
P
P
W.2.203
To Next Page
Loading...