Force Flow WIZARD 4000 - 9087 Time and Date; 9088 Calibration Factor; 9089 Channel Identification Numbers

Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
AUTO PRINT ?
1 = Y 0 = N _____
Do you want to engage the AUTO PRINT (Datalogging) function?
Choices: "1" = YES "0" = NO (by engaging this function, the
WIZARD 4000 will automatically download all display functions
and totals on an hourly or daily basis).
AUTO PRINT TIME
___HOUR ___DAY
Use ARROW KEY to select AUTO PRINTING once per HOUR or
once per DAY.
9086 FORMAT PRINTER PORT (RS232 / RS485) continued .....
XX
XX
XX
XX
XX
Enter the YEAR (last 2 digits only. Example: 96 = 1996)
Enter the MONTH (2 digits. Example: 09 = Sept)
Enter the DAY (2 digits. Example: 02 = 2nd)
Enter the HOUR (military time. Example: 14 = 2pm)
Enter the MINUTE (2 digits. Example: 05 = 5 minutes)
Digital Display / Default (in red) Action Required - Press "ENTER" after completing each step
Sets time and date
YEAR
MONTH
DAY
HOUR
MINUTE
9087 TIME AND DATE
Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
The number displayed should correspond to the calibration factor
recorded on the calibration data inside the front cover. To restore
original factory value, use numeric keypad to enter correct value.
9088 CALIBRATION FACTOR
Allows you to verify Calibration Factor against original factory Calibration Factor.
Action Required - Press "ENTER" after completing each step
Digital Display / Default (in red)
9089 CHANNEL IDENTIFICATION NUMBERS
Allows you to assign an Identification Number (from 1 to 99) to each scale.
CHANNEL 1 SCALE
NUMBER = XX
The number displayed should correspond to the zero factor recorded on the
calibration data inside the front cover. To restore orginal factory value, use
numeric keypad to enter correct value.
Factory setting is 15. DO NOT CHANGE.
Factory setting is 47. DO NOT CHANGE.
SCALE 1 FACTOR
NUMBER = XXXXXX
SCALE 1 MOT CTS
NUMBER = 15
SCALE 1 ZERO
NUMBER = XXXX
SCALE 1 FILTER
NUMBER = 47
Use the numberic keypad to enter any number from 1 to 99 to
identify each scale.
NOTE: Repeat for each additional scale.
1150-D Burnett Ave, Concord, CA 94520 USA
1-800-893-6723 US & Canada, Fax: 925-686-6713
www.forceflow.com / info@forceflow.com
File: T4\O&M\AWZMSTR\WZSET3D.tcw 05/27/99 (B16.pdf)
If 'YES", you will see the following:
QUESTIONS ? Help Hotline: 1-800-893-6723
FORCE FLOW FORCE FLOW
F F L L O O Q Q I I U U P P
W.2.204