Force USA F-HPR - Additional Assembly Steps; End Cap and Stopper Attachments

12
ADDITIONAL ASSEMBLY
1. Attach a SQUARE END CAP 45 (33) to the front end of the REAR UPPER FRAME (11) and the top of the WEIGHT GLIDE
POST (10)
2. Attach a SQUARE END CAP 38 (34) using a WASHER (40) to the top of the stopper at the base of the WEIGHT GLIDE
POST (10)
3. Attach a SQUARE END CAP 50 (36) to the rear of the SLIDING WEIGHT POST (21)