Force F-G20-BASE - Installation Instructions: Step 1

Assembly step-1 drawing
12
Assembly step-1 installaon instrucon
1 Assembly guide rod-2 on ground tube-1,then cover crush pad-6 on guide rod-2 using M10*16 hexagon bolt-
12,Φ10 washer-8.
2
Assembly hang sha-11 on ground tube-1.
3 Assembly le stand tube-3,right stand tube-5 on ground tube-1,respecvely using M10*70 hexagon bolt-10,
Φ10 washer-8.
4 Assembly connect support tube-4 on ground tube-1 using M10*95 hexagon bolt-7,Φ10 washer-8,M10 lock
nut-9.
12501250 857.27 12501250 857.27 12501250 857.27 12501250 857.27
ATTENTION:
Please aenon the size of the
back and front.
To void the size back high
pull don’t suitble.