Force F-G20-BASE - Installation Instructions: Step 10

42
Assembly step-10 drawing
Assembly step-10 installaon instrucon
1 Assembly up connecon tube-123 on main machine using M10*25 hexagon bolt-100,Φ10 washer-8,Φ10
spring gasket-19.
2
Assembly hook-125 on up cross tube-124 using Φ8 washer-79,M8 lock nut-80.
3 Assembly up cross tube-124 on up connecon tube-123 using M10*70 hexagon bolt-10,Φ10 washer-8,M10
lock nut-9.
4 Assembly back stand tube-126 on ground tube-1 using M12*25 hexagon bolt-23,Φ12 washer-25,Φ12 spring
gasket-24.
5 Assembly back stand tube-126 on up cross tube-124 using M10*75 hexagon bolt-56,Φ10 washer-8,Φ10
spring gasket-19.
6 Assembly back stand tube-126 on up cross tube-124 using M10*70 hexagon bolt-10,Φ10 washer-8, M10
lock nut-9.