Wipe down the equipment to remove any dust and sweat residue with a dry, non-abrasive
cloth
Inspect the unit for noisy, damaged or loose components
Daily Maintenance
Monthly Maintenance
Thoroughly clean the equipment using a non abrasive cloth dampened with a mild, all
purpose cleaner ensuring to thoroughly wipe down and dry the equipment afterwards
Apply a 100% silicone lubrication (preferably spray) to guide rods, pulley sliders, weight
plate carriages and any other moving parts where friction can occur including bearings
(where applicable). Any other form of lubrication will void your warranty
Check the tightness of all bolts, nuts and screws
Check the cables for fraying or any signs of wear and ensure they are at the correct
tension with a small amount of slack at resting position (where applicable)
Inspect pulleys for any damage or cracks (where applicable)
Knurling can be cleaned using a soft bristled brush to help remove any particles that may
be nestled within the knurling
Vacuum around the machine/equipment to prevent dust acclimation
PREVENTATIVE MAINTENANCE
To ensure your equipment is operating at its peak, please follow the below preventative
maintenance schedule performing all tasks upon initial assembly:
To Next Page
Loading...
Need help?
General
