Force JX-DS913 - Step 9: Butterfly Arms Assembly

Assembly Instructions
Step 9
Attach the Right butterfly(9#) to the front press base(8#),Secure them together with 1pc butterfly
axle(21#),2pcs
φ
10 washer (76#),2pcs M10 Aircraft nut(77#) and 2cps nut cover(58#).
Push 1pc butterfly foam roll(27#) as the diagram shows.Attach the handle(11#) into the hole of the
butterfly ans secure them with 1pc M10
×
55 Allen Bolt (65#),1pc M10
×
20 Allen Bolt (68#) and 2pcs
φ
10 washer(73#).
Repeat the same way to install the left butterfly.
14