The Scoot Hands-Free Drone is an innovative and engaging flying toy designed for users aged 14 and above, offering a unique hands-free flight experience. This drone is controlled by sensing nearby objects and changing direction, making it an interactive and intuitive device for indoor play. Its design emphasizes safety and ease of use, allowing for a fun and dynamic flying experience without the need for a traditional remote control.
Function Description:
The Scoot drone operates as a hands-free flying device that responds to its environment. Its primary function is to fly and hover autonomously, detecting obstacles and user interactions to navigate. When powered on and fully charged, the drone will hover in place, ready for flight. Users can influence its direction and altitude through simple hand gestures. By placing a hand near the drone, it will sense the proximity and adjust its flight path accordingly, allowing for directional control and elevation changes. The drone automatically rotates to sense the room, helping it avoid crashes and navigate effectively. When its battery is low, the center light will blink red, signaling the need for a recharge. To stop the drone, users can gently "catch" it and turn it upside down, which will halt its flight. If the drone crashes, it is designed to be durable enough to be tossed back into the air to resume flight.
Usage Features:
The Scoot drone is designed for straightforward and intuitive use, making it accessible even for those new to drones.
- Hands-Free Control: The most distinctive feature is its hands-free operation. Instead of a remote control, the drone uses sensors to detect nearby objects, including hands, to influence its flight. This allows for a more immersive and interactive experience.
- Automatic Obstacle Avoidance: The drone is equipped with sensors that enable it to detect obstacles in its environment. When it senses something nearby, it will automatically change direction to avoid collisions, enhancing safety and preventing damage.
- Altitude Control: Users can make the drone go higher by placing a hand underneath it when it's close by. The drone will sense this request and ascend, providing a simple way to control its elevation.
- Directional Control: By positioning a hand in the drone's flight path, users can "tell" it which way to lean and change direction. This allows for a dynamic and engaging way to guide the drone through a room.
- Easy Launch: To start flying, simply turn the drone on, wait for the center light to turn solid green (indicating it's ready), and then gently drop it. The drone will then begin to soar and race.
- Simple Stop Mechanism: Stopping the drone is as easy as catching it gently and turning it upside down. This action immediately halts the propellers, ensuring a safe landing.
- Crash Resilience: The drone is built to withstand minor crashes. If it happens to crash, users can simply toss it back into the air to resume flight, minimizing interruptions to playtime.
- Indoor Use: The Scoot drone is best suited for indoor environments with plenty of space. This ensures optimal performance of its obstacle avoidance sensors and provides a safe area for flight.
- Calibration: Before each use, the drone needs to be calibrated. This involves turning it on, waiting for the center light to turn solid green, shaking it back and forth 3 to 5 times, and then placing it on a flat surface until the center light turns solid green again. This ensures accurate flight control.
Maintenance Features:
Proper care and maintenance are crucial for ensuring the longevity and safe operation of the Scoot drone.
- Charging Safety: The drone contains a rechargeable internal lithium polymer (Li-Po) battery. It is essential to use only the recommended charger and connect it to a computer's USB port, power bank, or phone wall charger. Avoid charging on gaming consoles. The USB charger light will be off when charging and turn red when fully charged. It is critical to never leave the battery charging unsupervised, as overcharging can lead to overheating and potential damage or fire.
- Battery Care: Never overcharge the Li-Po battery. Do not charge it near flammable materials or liquids, and keep it away from children and animals. If the battery appears ballooned, swelled, punctured, or damaged, it should not be used or charged, and careful disposal is required.
- Environmental Precautions: Keep the drone away from humid environments, as its precise electronic components can be damaged by humidity or water vapor. Avoid exposing the drone to direct sunlight or excessive heat, which can cause distortion and damage to its materials.
- Handling Moving Parts: Always keep face, hair, and body away from the rotating motors when the power switch is turned ON to prevent serious injury. Tie back long hair or wear a hat to avoid entanglement.
- Storage: Store the drone upright and do not rest objects against it. When storing or leaving the drone unattended, always unplug it from the USB charger to avoid trickle charging.
- Charger Inspection: Regularly check the charger's wire, plug, and surface for any damage. Do not use a broken charger.
- Disposal and Recycling: For information on how to recycle Li-Po battery-powered products, users should contact their local electronics recycling facility.
- Product Warranty: Force1rc.com offers a limited 90-day warranty and free limited replacement parts for 90 days. To be eligible for warranty coverage, the product must be used as intended, not disassembled or modified, and the labels/serial numbers must show no signs of tampering. Buyers must register their product online to obtain a warranty code before making a claim. The warranty does not cover damage from normal wear and tear, accidents, misuse, unauthorized modifications, incorrect use of battery/charger, or operation outside specified parameters or in poor weather conditions.
- Replacement Parts: Force1.com provides free replacement parts for registered drones for 90 days from the purchase date, with exceptions for batteries, motors, circuit boards, cameras, and transmitters. Shipping charges may apply, and there is a limit of one part type request per registered drone.
- Customer Support: For any questions, comments, or to request spare parts, users can email support@force1rc.com. For warranty claims, email warranty@force1rc.com with relevant details.
Need help?
General
To Next Page
