What to do if Force1 Drone propellers spin but it won’t fly?
If your Force1 Drone's propellers are spinning but it's not taking off, first check the propellers for any signs of damage and remove any obstructions. If that doesn't work, try turning off both the drone and the palm remote, then turn them back on.
What to do if Force1 Drone LED lights flash, but it won’t fly?
If the LED lights on your Force1 Drone are flashing but it's not flying, ensure that the palm remote battery is functioning correctly. Test the buttons on the remote and the drone to verify that they are communicating with each other.
What to do if Force1 Drone won’t charge?
If your Force1 Drone isn't charging, check whether the charging cable is properly connected to the USB port and the socket in the battery. When charging, the USB plug should display a red light, and the light should turn off when fully charged.
Initiate ascent, landing, or auto hover by pressing the Master Joystick IN.
The drone auto hovers when the hand is held flat and neutral.
Tilt the Palm Remote nose down to move the drone forward.
Details the 90-day limited warranty and free replacement parts policy.
General| Brand | Force1 |
|---|---|
| Model | MONARCH |
| Category | Drones |
| Skill Level | Beginner |
| Age Range | 14+ |
| Camera | 720p |
| Battery | 3.7V 500mAh LiPo |
| Charging Time | 60 minutes |
To Next Page
