Ford 1997 Contour - Page 130

Driving
131
*
[GF04800(ALL)12/95]
To operate:
*
[GF04900(ALL)12/95] 1. Start the engine.
*
[GF05000(ALL)12/95] 2. Depress and hold the brake pedal.
*
[GF05100(ALL)12/95] 3. Move the gearshift lever out of P (Park).
%
*
[GF05200(ALL)12/95]
Your vehicle is equipped with a Brake Shift Interlock safety
feature. This feature prevents the gearshift from being moved
from the P (Park) position until the brake pedal is depressed.
This feature is active when the ignition is in the ON position. If
the gearshift lever CANNOT be moved from P (Park) with the
brake pedal depressed:
*
[GF05300(ALL)12/95] 1. Turn the engine off and remove the ignition key.
[GF05400(ALL)12/95] 2. With the parking brake applied and the brake pedal
depressed, insert a screwdriver about 2" (5 cm) into the
square opening to the right of the gearshift at the base of the
console.
[GF05500(ALL)12/95] 3. Rotate the screwdriver point rearward.
[GF05600(ALL)12/95] 4. Push and hold the thumb button and move the gearshift.
[GF05700(ALL)12/95] 5. Remove the screwdriver when the gearshift moves from the
P (Park) position.
File:09cdgfo.ex
Update:Thu Sep 12 11:04:39 1996