Maintenance and Care
195
[MC12700(ALL)12/95]
10-1/2 pica
art:0001260-A
The power steering fluid reservoir
[MC12800(ALL)04/96]
Use only MERCONH power steering fluid that meets Ford’s
Specification or an equivalent.
%
*
[MC12900(ALL)01/96] Automatic Transaxle Fluid
*
[MC13000(ALL)02/96]
Under normal circumstances, you do not need to check the fluid
level of the transaxle, since your vehicle does not use up
transaxle fluid. Refer to the Maintenance Schedule booklet for
replacement intervals. However, if the transaxle is not working
properly — for instance, the transaxle may slip or shift slowly,
or you may notice some sign of fluid leakage — the fluid level
should be checked.
%
*
[MC13100(ALL)01/96
]
Checking the Automatic Transaxle Fluid
*
[MC13200(ALL)12/95]
With the vehicle on a level surface and the brake fully applied,
start the engine and move the gear shift selector through all of
the gears allowing sufficient time for each position to engage.
Securely latch the gear shift selector in the P (Park) position.
Fully set the parking brake and leave the engine running.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996
To Next Page
Loading...
