EasyManua.ls Logo

Ford 1997 Contour - Wiper Blades

Ford 1997 Contour
279 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
202
[MC17000(ALL)12/95] 4. The filter is in a housing at the back of the engine
compartment, on the left side. Pull off the two clips on the
sides of the housing. Slide out the housing and filter.
[MC17100(ALL)12/95]
13-1/2 pica
art:0001244-B
Removing the passenger compartment air filter
[MC17200(ALL)12/95] 5. Slide the filter out of the housing, replace with the new
filter, and slide the housing and passenger compartment air
filter back into place. Reinstall the clips on the housing.
[MC17210(ALL)12/95] 6. Replace the grille and wiper arms.
%
*
[MC17300(ALL)02/96] Wiper Blades
*
[MC17400(ALL)01/96]
Check the windshield wiper blades at least twice a year. Also
check them whenever they seem less effective than usual.
Substances such as tree sap and some hot wax treatments used
by commercial car washes reduce the effectiveness of wiper
blades.
*
[MC17500(ALL)01/96]
If the blades do not wipe properly, clean both the windshield
and the wiper blades. Use undiluted windshield washer solution
or a mild detergent. Rinse thoroughly with clear water. Do not
use fuel, kerosene, paint thinner, or other solvents to clean your
wiper blades. These will damage your blades.
File:11cdmco.ex
Update:Thu Sep 12 11:08:18 1996

Related product manuals