To open the dual panel moon
roof: Press and release the SLIDE
control. The moon roof will
automatically open. If the sunscreen
is closed, it will automatically open
prior to opening the moon roof.
WARNING: When closing the dual panel moon roof, you should
verify that it is free of obstructions and ensure that children
and/or pets are not in the proximity of the roof opening.
To close the dual panel moon roof: Pull down the SLIDE control and
release. The moon roof will automatically close. If the sunscreen is open,
it will automatically close prior to closing the moon roof.
Bounce-back: When an obstacle has been detected in the moon roof
opening as the moon roof is closing, the moon roof will automatically
open and stop at a prescribed position.
Bounce-back override: To override bounce-back function, pull and hold
the SLIDE switch within two seconds of a bounce-back event. The moon
roof will close without the bounce-back function active. For example:
Bounce-back override can be used to overcome the resistance of ice on
the moon roof or seals.
To vent the dual panel moon roof: Press and quickly release the TILT
control (moon roof is equipped with, automatic, one-touch, tilt open
feature). The moon roof must be in the closed position in order to
move it into the vent position.
To close dual panel moon roof from vent: Pull and quickly release
the TILT control down to close the glass from the vent position to close
(moon roof is equipped with automatic, one-touch, tilt close feature).
Driver Controls
115
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
