1. Insert a screwdriver into the gap
between the mirror housing and the
mirror glass and release the metal
retaining clip.
1. Make sure the lighting control is in the
off position and open the liftgate.
2. Remove the two bolt covers using a
standard flat tip screwdriver.
3. Remove the two bolts from the lamp
assembly.
4. Gently pull the lamp assembly away
from your vehicle.
Type 2
Direction Indicator
Follow the same procedure as type 1 to
remove the direction indicator bulb.
Note: The tail and brake lamp bulbs are not
serviceable items, see an authorized dealer
if they fail.
180
Escape/Kuga (CBS)
Maintenance
To Next Page
Loading...
