1. Fold down the second row seat and
release the handle.
2. Pull the handle up again until the seat
releases from the floor.
3. Push the seat upward and fold it away
from the third row.
To return the seat to a seating position:
1. Push the seat down and latch to the
floor.
2. Bring the seatback to an upright
position. The seatback should lock into
position.
Note: If the seatback will not return to the
upright position, tumble the seat again and
re-latch it to the floor. Be sure that cargo or
other objects are not trapped underneath
the seatback.
Note: If a squeak is heard from the latch
area, the latch striker pin should be wiped
clean of dust or debris.
Exiting the Third Row
1. Pull the strap located at the bottom
outboard of the seatback to release
the seat from the floor, and rotate the
seat up toward the front seat.
2. Follow the directions above to return
the seat from the E-Z entry to the
upright position.
Reclining the Second Row
Outboard 40% Seatback
WARNING
Reclining the seatback can cause an
occupant to slide under the seat’s
safety belt, resulting in severe
personal injuries in the event of a crash.
130
Expedition (TB7) Canada/United States of America, enUSA, First Printing
Seats
To Next Page
Loading...
