Front Fog Lamp (If Equipped)
1. Use a suitable tool, for example a
screwdriver, to carefully remove the
housing cover.
Note: To remove push pins, use a
flat-bladed screwdriver to pull up the center
release pin.
2. Disconnect the electrical connector.
3. Turn the bulb holder counterclockwise
and remove it.
Note: You cannot separate the bulb from
the bulb holder.
Note: Do not touch the bulb glass.
Rear Direction Indicator and
Reversing Lamp
1. Switch all of the lamps and the ignition
off.
2. Use a suitable tool, for example a
screwdriver, to carefully remove the
screw covers.
3. Remove the retaining bolts from the
lamp assembly.
4. Gently pull the lamp assembly away
from the vehicle.
292
Explorer (TUB) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing
Maintenance
To Next Page
Loading...
