1. Position the child restraint in a seat
with a combination lap and shoulder
belt.
2. Pull down on the shoulder belt and
then grasp the shoulder belt and lap
belt together.
3. While holding the shoulder and lap belt
portions together, route the tongue
through the child restraint according
to the child restraint manufacturer's
instructions. Make sure that you did not
twist the belt webbing.
4. Insert the belt tongue into the proper
buckle (the buckle closest to the
direction the tongue is coming from)
for that seating position until you hear
a snap and feel the latch engage. Make
sure the tongue is latched securely by
pulling on it.
5. To put the retractor in the automatic
locking mode, grasp the shoulder
portion of the belt and pull downward
until you pull all of the belt out.
23
2023 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202111, First-Printing
Child Safety
To Next Page
Loading...
Need help?
General
