IN-VEHICLE SERVICE
Oil Pump
NOTE: The oil pump (6600) is only serviced as an assembly. Refer to Section 03-00 for disassembly
and cleaning instructions.
R
emoval
1. NOTE: On Ranger vehicles it is necessary to remove the engine to remove the oil pan. On
Aerostar vehicles, it is necessary to remove the transmission as outlined in Group 07 to
properly reseal the oil pan.
Remove oil pan (6675) as detailed in this section.
2. Remove oil pump attaching bolts. Lift off oil pump and withdraw oil pump intermediate shaft (6A618).
Section 03-01C: Engine, 4.0L V-6 1997 Aerostar, Ranger Workshop Manual
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C29.HTM~gen~ref.HTM
To Next Page
Loading...
Need help?
General
