Replacing Front Parking Lamp and Turn Signal Bulbs
1. Make sure the headlamp control is in the off position.
2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs
in this section.
Aerodynamic
Sealed Beam
3. Rotate the bulb socket counterclockwise and remove.
4. Carefully pull the bulb straight out of the socket.
To complete installation, follow the remo val procedur es in reverse or der.
226 Maintenance
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
To Next Page
Loading...
