REMOTE START*
Remote start allows you to start the engine from outside your
vehicle using your remote control.
To start, press
and then press twice within three
seconds. Before driving your vehicle, you must press the
push button ignition switch on the instrument panel while
applying the brake pedal. You can also turn your vehicle o
from outside aer a remote start by pressing
once. If your
vehicle is equipped with remote feedback, an LED on the
remote control provides status feedback of remote start or
stop commands. A solid green light means the remote start or
extension was successful, while a blinking red light means the
remote start or stop has failed. A solid red light means that
the remote stop was successful and the engine is o. When
the system is waiting for a status update from the vehicle, you
see a blinking green light.
WIRELESS ACCESSORY CHARGER*
This feature supports QI wireless charging-compatible
devices. You can only charge one device at a time on the
charging area. You can charge a device if the vehicle is
running, in accessory mode or if SYNC is on. Keep the charging
area clean and remove foreign objects prior to charging. To
begin charging your device,
place the device in the port
with the charging side down.
The charging stops aer
your device reaches a full
charge. For more information,
see the
Wireless Accessory
Charger
chapter of your
Owner’s Manual.
11CONVENIENCE
*if equipped
To Next Page
Loading...
