Ford EXPLORER 2013 - Front Parking Lamp;Turn Signal and Sidemarker Bulbs; Replacing Front Parking Lamp;Turn Signal Bulbs; Replacing Sidemarker Bulbs

Front parking lamp/turn signal and sidemarker bulbs
1. Make sure that the headlamp control is
in the off position.
2. Open the hood.
3. Remove the hood overslam bumper
tower to service park/turn or sidemarker
bulbs (if needed).
Replacing front parking lamp/turn signal bulbs
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
Replacing sidemarker bulbs
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
Maintenance 359
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)