Ford Explorer 2020 - High Voltage Charge Cord Manual Release; Charge Cord Release Procedure

Section 3: High Voltage Charge Cord Lock Manual Release
High Voltage Charge Cord Lock Manual Release
NOTE:
Some regions have charging stations that engage a safety latch, that positively locks the High Voltage charge cord to the vehicle charge port
until the latch is released. If this latch fails to release, the cord cannot be removed without special action outlined in the steps below.
1.
If equipped, remove the padlock or combination lock installed on the charging coupler.
2. If equipped, press the release button on the charging coupler.
3.
While holding the release button (if equipped) on the charging coupler, press the unlock switch located near the charging port on the
vehicle. Remove the charging coupler from the vehicle charge port.
3-2 High Voltage Charge Cord Lock — Manual Release
Section 3: High Voltage Charge Cord Lock Manual
Release
2020 Explorer / Aviator Hybrid Vehicle Emergency Response Guide - 09/2019