Ford F-150 LIGHTNING - Checking the Wiper Blades; Replacing the Front Wiper Blades

ADJUSTING THE SENSITIVITY OF
THE RAIN SENSOR
E311292
Low sensitivity.A
High sensitivity.B
Use the rotary control to set the sensitivity
of the rain sensor.
When you select low sensitivity, the wipers
operate when the sensor detects a large
amount of water on the windshield.
When you select high sensitivity, the wipers
operate when the sensor detects a small
amount of water on the windshield.
CHECKING THE WIPER
BLADES
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT
WIPER BLADES
E165804
1. Pull the wiper blade and arm away
from the glass.
Note: Do not hold the wiper blade to lift the
wiper arm.
E327597
2
2. Lift the wiper blade primary locking clip.
111
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Wipers and Washers