Press the button to switch the power
outlet on and off.
SETTING THE HIGH VOLTAGE
BATTERY RESERVE LIMIT
When the vehicle is in park (P) you can set
a high voltage battery reserve limit to save
a range which you can drive your vehicle
before recharging.
You can set the high voltage battery
reserve limit on the touchscreen.
A notification indicates when the vehicle
reaches the pre-set limit and Pro Power
Onboard turns off.
Note: After your vehicle reaches the pre-set
limit, the vehicle power down timer is
enabled again. See What Is the Vehicle
Power Down Timer (page 195).
RESETTING GROUND FAULT
DETECTION
After disconnecting all electrical loads the
ground fault can be reset using the
switches on the power point, on the
instrument panel or on the touchscreen.
Use the controls on the touchscreen to test
the ground fault detection circuit.
RESETTING THE CIRCUIT
BREAKER - VEHICLES WITH:
9.6KW
Press the button on the upper right area of
the bed outlet when the circuit breaker has
opened after a fault has occurred to reset
the circuit breaker to the on position. There
are two circuit breaker buttons that
correspond to the A and B outlets.
187
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Onboard Generator
To Next Page
Loading...
