2. Release the brake pedal. The system
holds your vehicle at a standstill. The
auto hold active indicator remains
illuminated in the information display.
3. Pull away in the normal manner. The
system releases the brakes and the
auto hold active indicator switches off.
Note: The system only activates if you
apply enough pressure on the brake pedal
to bring the vehicle to standstill.
Note: Under certain conditions, the system
could apply the electric parking brake. The
brake system warning lamp illuminates. The
electric parking brake releases when you
press the accelerator pedal. See
Automatically Releasing the Electric
Parking Brake (page 239).
Note: The system switches off if you shift
into reverse (R) or neutral (N) while pressing
the brake pedal. If you do not press the
brake pedal while shifting into reverse (R)
or neutral (N), auto hold continues to hold
the vehicle. In this case, pressing the brake
pedal causes auto hold to stop holding the
vehicle.
The auto hold system does not work when
any of the following actions are performed:
• When you use active park assist.
• Your vehicle is in stay in neutral mode.
• The driver door is open.
• You shift into reverse (R) or neutral (N)
before the system is active.
• Trail Control or Trail One Pedal are
active.
AUTO HOLD INDICATORS
Illuminates when the system is
on but cannot hold your vehicle
at a standstill at this particular
time.
248
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Auto Hold
To Next Page
Loading...
