6. On the wall or screen you will see a flat
zone of high intensity light located at
the bottom of the beam pattern. If the
bottom edge of the high intensity light
zone is not at the horizontal reference
line, the headlamp needs to be
adjusted.
Note: To see a clearer light pattern while
adjusting one headlamp, block the light
from the other headlamp.
7. Locate the vertical adjuster on each
headlamp. Use a Phillips #2
screwdriver to turn the adjuster either
clockwise or counterclockwise to
adjust the vertical aim of the
headlamp.
8. Repeat Steps 3 through 7 to adjust the
other headlamp.
9. Close the hood and switch off the
headlamps.
EXTERIOR BULBS
EXTERIOR BULB SPECIFICATION
CHART
Note: LED lamps are not serviceable. See
an authorized dealer if they fail.
INTERIOR BULBS
INTERIOR BULB SPECIFICATION
CHART
Your vehicle has LED lamps. These are not
serviceable items. See an authorized dealer
if they fail.
441
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Maintenance
To Next Page
Loading...
