Multi-Point Inspection
Radiator, cooler, heater and air conditioning
hoses
12V Battery performance
Suspension components for leaks or
damage
Exterior lamps and hazard warning system
operation
Steering and linkage
Fluid levels; fill if necessary
1
Tires for wear and proper pressure
2
For fluid leaks
Windshield for cracks, chips or pitsHalf-shaft dust boots
Washer spray and wiper operationHorn operation
1
Brake, coolant recovery reservoir and window washer.
2
Your vehicle is equipped with a temporary mobility kit; check the tire sealant expiration
Use By date on the canister. Replace as needed.
Be sure to ask your dealership service
advisor or technician about the multi-point
vehicle inspection. It is a comprehensive
way to perform a thorough inspection of
your vehicle. Your checklist gives you
immediate feedback on the overall
condition of your vehicle.
NORMAL SCHEDULED MAINTENANCE
Normal Scheduled Maintenance
1
Rotate the tires, inspect for tire wear and measure the
tread depth.
Every 12 months or
10,000 mi (16,000 km).
Perform a multi-point inspection (recommended).
Inspect the brake pads, shoes, rotors, drums, brake linings,
hoses and the parking brake.
Inspect the cooling system coolant level, coolant strength,
and the cooling system hoses.
Inspect the halfshaft boots.
563
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Scheduled Maintenance
To Next Page
Loading...
