What to do if my Ford FG9250E engine will not start?
- UucoffeyAug 6, 2025
If your Ford Inverter's engine won't start, shuts down, or runs rough, try the following: ensure the switch is in the “ON” position, replace the air filter, clean or replace the fuel filter, replace the fuel, reconnect the spark plug wire, replace the spark plug, drain the fuel tank and replace the fuel, ensure the fuel valve is in the “ON” position, turn off the choke, fill the crankcase to the proper oil level and place the generator on a level surface, recharge or replace the battery, or wait 5 minutes and recrank the engine.







