9
ASSEMBLY
Description Qty
Wheel
Axle
2
Supporting Leg
2
Hair pin
2
Hub Cap
Screw, Self-Tapping
2
2
Unpacking
1. Place box on a level surface.
2. Remove all items from box except the generator. Make sure all items listed on the packing list are included and not
damaged.
3. Cut down the sides of the box being careful to avoid hitting the generator.
4. Leave generator on box to install wheel assembly.
Packing List
Check all loose parts to the following list. Contact your dealer if any loose parts are not included.
Description Qty
Generator
1
Operator’s manual
1
Product registration card
1
4-Cycle engine oil (SAE10W-30)
Extension Cord
Toolkit
Spark Plug Wrench
Phillips screwdriver
10mm Combination Wrench
1
1
1
1
1
1
Washer
4
M8 Screw
2
12V DC Charging Cable
1
Funnel
1
+
+
++ + +
+
+ +
( )
10W30
OIL
+
To Next Page
Loading...
