Replacing the low beam headlamps
Note: The low beam headlamp is the outboard lamp.
Note: Never hold a bulb by the glass. This is particularly valid for
halogen bulbs as the intensity of the light may be reduced if the hands
touch the bulb. If the glass has been handled, clean it with alcohol.
1. Remove the bulb cover.
2. Turn the bulb holder
counterclockwise and remove it.
3. Disconnect the electrical connector.
4. Reverse the procedure to install the new bulb
Replacing the high beam headlamps
Note: The high beam headlamp is the inboard lamp.
Note: Never hold a bulb by the glass. This is particularly valid for
halogen bulbs as the intensity of the light may be reduced if the hands
touch the bulb. If the glass has been handled, clean it with alcohol.
Lights
113
2012 Fiesta (fie)
Owners Guide, 3rd Printing
USA (fus)
To Next Page