TRIP COMPUTER (IF EQUIPPED)
Press the end of the lever, located
on the left side of the steering
wheel to scroll through the displays.
To reset the trip odometer and
average speed, scroll to the required
display and press and hold the end
of the multifunction lever.
The trip computer includes the
following information displays:
MI (KM) TRIP — TRIP ODOMETER
Registers the distance of individual journeys.
MI (KM) TO E — DISTANCE TO EMPTY (IF EQUIPPED)
Indicates the approximate distance the vehicle will travel on the fuel
remaining in the tank. Changes in driving pattern may cause the value to
vary.
AVG MPG (L/100KM) — AVERAGE FUEL CONSUMPTION
(IF EQUIPPED):
Indicates the average fuel consumption since the function was last reset.
Note: After resetting, the display will show two dashes for several
seconds while it recalculates a new value.
AVG MPH (KM/H) — AVERAGE SPEED (IF EQUIPPED)
Indicates the average speed calculated since the function was last reset.
MULTIFUNCTION DISPLAY
Your vehicle’s multifunction display is capable of monitoring many vehicle
systems and will alert you to potential vehicle problems and various
conditions with an informational message. You can also program various
vehicle settings using the message center.
The display is located in the center stack.
Instrument Cluster
18
2012 Fiesta (fie)
Owners Guide, 3rd Printing
USA (fus)
To Next Page
Loading...
Need help?
General
