Ford FIGO - Engine Coolant Check; Brake and Clutch Fluid Check

ENGINE COOLANT CHECK
Checking the coolant level
E102214
WARNING
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse the
affected areas immediately with
plenty of water and contact your doctor.
CAUTION
Make sure that the level is between
the MIN and the MAX marks.
Note: Coolant expands when it is hot. The
level may therefore extend beyond the MAX
mark.
If the level is at the MIN mark, top up
immediately.
Topping up
WARNINGS
Only top up when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
Do not remove the filler cap when
the engine is hot. Wait for the engine
to cool down.
Unscrew the cap slowly. Any pressure will
escape slowly as you unscrew the cap.
CAUTIONS
Do not spill coolant on any part of the
engine.
Do not top up further than the MAX
mark.
Top up with fluid that meets the Ford
specification. See Technical
Specifications (page 85).
BRAKE AND CLUTCH FLUID
CHECK
E102211
WARNING
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse the
affected areas immediately with
plenty of water and contact your doctor.
CAUTION
Make sure that the level is between
the MIN and the MAX marks.
Note: The brake and the clutch systems are
supplied from the same reservoir.
If the level is at the MIN mark, top up
immediately.
83
Maintenance