2. Pull the wiper blade away from the
wiper arm.
3. Install the new wiper by aligning with
the wiper arm groove and clip them
together.
Note: Make sure that the wiper blade locks
into place.
REMOVING A HEADLAMP
1. Open the hood. See Opening and
Closing the Hood (page 123).
2. Remove the screws and push pins.
3. Lift the outer side of the headlamp to
disengage it from the lower fixing point.
4. Pull the headlamp as far as possible
toward the center of your vehicle and
remove.
5. Disconnect the two electrical
connectors.
133
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Maintenance
To Next Page
Loading...
