SOURCE: Press to access different audio modes, such as AM, FM, Satellite
Radio and Line in.
A
Seek, Fast Forward and Reverse: In radio mode, select a frequency band
and press this button. The system stops at the first station it finds in that
direction. In CD mode, press to select the previous or next track. Press and hold
to move quickly forward through the current track.
B
SOUND: Press to access settings for Treble, Midrange, Bass, Fade or Balance.
Use the up and down arrow buttons to select the various settings. When you
make your selection, press the left and right arrow buttons to change the
settings. Press OK to set or press MENU to exit. Sound settings can be set for
each audio source independently.
C
TUNE: In radio mode, press to manually search through the radio frequency
band.
D
VOL and Power: Press to switch the system on and off. Turn to adjust the
volume.
E
USB PORT (If Equipped)
The USB port allows you to plug in media
playing devices, memory sticks and charge
devices (if supported). See your SYNC
information.
MEDIA HUB (If Equipped)
You can locate the media hub inside the
center console or on the instrument panel.
See your SYNC information.
317
Flex (), enUSA, First Printing
Audio System
To Next Page
Loading...
