EasyManua.ls Logo

Ford GALAXY - Automatic Main Beam Control

Ford GALAXY
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switch off the ignition and move the wiper
lever to position A within three seconds.
Release the lever when the windshield
wipers have moved to the service position.
See Changing the Wiper Blades (page
52).
Autolamps
The headlamps will come on and go off
automatically depending on the ambient
light.
See Lighting Control (page 55).
Automatic main beam control
WARNING
The system does not relieve you of
your responsibility to drive with due
care and attention. A manual
override may be necessary if the system
fails to switch the main beam on or off.
The system will automatically switch on
main beam if it is dark enough and no other
traffic is present. If it detects an
approaching vehicles headlamps or tail
lamps, or street lighting ahead the system
will switch off main beam before it can
distract other road users. Dipped beams
will remain on.
See Automatic High Beam Control
(page 56).
Direction indicators
Note: Tap the lever up or down to make the
direction indicators flash only three times.
Power windows
Note: To reduce wind noise or buffeting
when just one window is open, open the
opposite window slightly.
See Power Windows (page 75).
14
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
At a Glance

Table of Contents

Other manuals for Ford GALAXY

Related product manuals