4. Carefully insert the screwdriver in the
position shown to open the remote
control.
CAUTION
Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Carefully prise out the battery with the
screwdriver.
6. Install a new battery (3V CR 2032) with
the + facing downwards.
7. Assemble the two halves of the remote
control.
8. Install the key blade.
36
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Keys and Remote Controls
To Next Page
Loading...
