Ford Mondeo 1.6 - User Manual

Lists training literature and videos for the Mondeo.

Lists workshop literature and service microfiche.

Details modifications and new features of the Mondeo engines.

Highlights engine technology, capacities, and chamber design.

Lists EEC IV, EDIS-4, SEFI, and air mass measurement.

Covers US emission regulations and catalytic converters.

Mentions serial interface for diagnostic systems.

Outlines recommended service intervals for maintenance.

Details engine oil and filter change intervals and capacity.

Details additional control functions of the EEC IV module.

Explains the Exhaust Gas Recirculation system.

Describes the ACT sensor installation and function.

Details the TPS sensor's new design and connector.

Explains the PSPS installation and operating values.

Covers the DPFE sensor for the EGR system.

Describes fuel injectors and the fuel rail system.

Shows the location and components of the fuel rail.

Describes the inertia switch location and reset.

Details the ISC valve mounting and function.

Explains the pulse air solenoid valve function.

Describes the EVR for the EGR system.

Explains fan switching based on AC and ECT signals.

Details the function and location of air intake resonators.

Diagram showing the intake system layout.

Describes the throttle housing design and variants.

Details modifications to the pulse air system.

Explains the EGR system components.

Details how the EGR system reduces NOx emissions.

Describes the EVAP system and canister location.

Covers the catalytic converter and HEGO sensor.

Lists test connection points and their purpose.

Describes the octane adjust procedure.

Details test connection for the EEC IV module.

Shows vacuum hose routing and connections.